Viking cooktops are built-in gas or electric surfaces that drop into a counter cut-out. Typical calls involve a burner that will not spark, an element that stays cold, or a touch control that has stopped answering.
In the order we see them across Houston homes.
Viking cooktops come in gas and electric styles, set into stone or butcher-block counters with a cut-out sized to the model. Gas versions share much with the rangetop line, while electric ones add elements, glass and touch panels that behave differently.
Spills in Houston kitchens are often sugary or oily, and humidity makes the residue harden quickly. Over a few years it can clog gas ports, cloud the sensors on electric surfaces and loosen the gaskets that keep liquid out of the cabinet below.
We check the surface for cracks first, then test each burner or element, the switches and the connection below the counter. Anything unusual is shown to you before a part is ordered.
Trained on Viking cooktop controls and diagnostics.
Genuine OEM parts, stocked for the most common repairs.
A written price, approved by you before any work starts.
A 30-day workmanship warranty on every repair.
Stop using the surface, switch off its breaker and keep liquids away from the crack. A cracked top can let spills reach the wiring below. Call us for a replacement; do not try to tape or seal it.
Ticking with all burners off usually means moisture or grease is shorting an igniter, or a switch is stuck. Dry it well and wipe around the electrode. If it keeps ticking, we check the switch and the spark module.
Often yes, because most problems come down to a single burner, switch or element. We give you the price in writing first, so you can compare it with a new cutout before deciding.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
