On Viking 3 and 5 Series undercounter refrigeration with the electronic controller, such as the VRCI5240G, VRDI5240D and VRCO5240D, DA flashing on the controller means the door has been left ajar. The unit is telling you…
On Viking 3 and 5 Series undercounter refrigeration with the electronic controller, such as the VRCI5240G, VRDI5240D and VRCO5240D, DA flashing on the controller means the door has been left ajar. The unit is telling you the door is not fully closed. Other letters on this controller are normal info: Hi and Lo show stored maximum and minimum temperatures, PoF means the keypad is locked, and rSt resets the stored readings.
1. Close the door firmly and watch whether DA stops flashing. 2. Check that bottles, trays or shelves are not holding the door open. 3. Wipe the gasket with warm water and dry it. 4. Check that the unit sits level and the door swings freely. 5. If DA stays after the door is clearly shut, call us.
No. It says the door was left ajar. Closing it fully usually ends the message, and the unit goes back to normal cooling without any repair or reset needed.
Check for items holding it slightly open, wipe the gasket, and make sure the unit is level. If DA stays, the door switch or controller may need a look.
Hi and Lo show the stored highest and lowest temperatures, and PoF means the keypad is locked. They are information, not failures. DA is the one that points at the door.
A technician diagnoses it on site and gives you the price in writing before any work starts.