Viking 7 Series Range Alert: red backlight and flashing knob rings

What Red backlight / flashing knob rings means

On Viking Professional 7 Series ranges and rangetops with backlit knobs, such as the VGR73626BSS, VDR73626BSS and VGR74828BSS, a red backlight with flashing knob rings is an error signal. The griddle or oven knob ring flashes a set number of times for each error code. The owner materials give no table that ties a flash count to a meaning, so the count itself is the key detail to write down and pass on to us.

Common causes of Red backlight / flashing knob rings

A control or sensor condition on the range that the knob lights are reporting
A temporary condition after a power interruption
A part that needs a technician to read the flash count and test

✓ One safe check you can try

1. Count the flashes on the ring and write the number down. 2. Turn all knobs off and let the range cool. 3. If you smell gas at any time, leave the house and call the gas utility from outside. 4. Power the unit down at the range breaker for sixty seconds, then power it up. 5. If the red light returns, call us with the flash count and model number.

! Why to stop there

No public list explains the flash counts, so guessing a meaning is misleading
The range needs to be tested with the count in hand
Gas parts are never an owner repair

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

DSI 7 FlashesViking Range Code DSI 7 Flashes: Power Applied With a Knob On DSI LED OnViking Range Code DSI LED On: Steady Light at the Ignition Module DSI No LEDViking Range Code DSI No LED: Ignition Module Shows No Power Er31Viking Professional Induction Range Code Er31: interface error after board change Fan HallViking Gas Range Code Fan Hall: Fan Speed Sensor Problem Griddle RTD (2 flashes then 4 s off)Viking Professional 48-Inch Range Griddle Pattern: 2 flashes for griddle RTD probe Improper Self-Clean SelectionViking VDSC548T Code Improper Self-Clean Selection: A Delayed Clean Is Not Allowed Key ShortViking VDSC Range Code Key Short: A Key Press Lasting Over 30 Seconds

Red backlight / flashing knob ringsRed backlight / flashing knob rings questions

What does the number of flashes mean?

There is no published list that ties each count to a cause, so we do not guess. Write the count down and give it to us along with the full model number.

Is it safe to cook while the ring is red?

If you smell gas, leave the house and call the gas utility from outside. Otherwise treat the alert as a stop sign for the affected knob until it has been checked.

What happens on the visit?

We read the pattern, test the circuits it points to, and give you a written price before any work. Repairs carry a 30-day workmanship warranty.