Viking VDSC Range Code No Probe: The Meat Probe Input Reads Open

What No Probe means

On Viking Professional VDSC5xxT dual-fuel ranges with EOC4 control, such as the VDSC536T-6B or VDSC548T-4GQ, No Probe means the meat probe input is open, so the control sees no probe connected. It appears when you pick a probe-based cook setting without a probe plugged into the oven jack. Often nothing is broken, but a damaged probe or worn jack can also leave the input open.

Common causes of No Probe

Meat probe not plugged in all the way
Probe cable broken inside the insulation
Probe jack in the oven worn or dirty
Wiring from the jack to the EOC4 control

✓ One safe check you can try

1. Let the oven cool before touching the jack. 2. Push the probe plug in firmly, all the way. 3. Look at the cable for kinks, burns or flattened spots. 4. Try again with the probe tip inserted in the food. 5. If No Probe stays on with a good probe, call us.

! Why to stop there

A probe cable can look fine and still be broken inside
Jack wiring is behind the oven liner
If the same message appears without any probe selected, the input is the issue and needs meter checks

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Meat ProbeViking VDSC Range Code Meat Probe: Probe Shorted or Misreading DoorViking VDSC Range Code Door: Opened in the Middle of a Clean Cycle Model HeaderViking VDSC Range Code Model Header: Missing or Wrong for the Display Door LatchViking VDSC Range Code Door Latch: Lock Slow or in the Wrong Position Red backlight / flashing knob ringsViking 7 Series Range Alert: red backlight and flashing knob rings DSI 1 FlashViking Range Code DSI 1 Flash: Normal Ignition Module Heartbeat RTD ProbViking VDSC Range Code RTD Prob: Oven Sensor Open or Shorted DSI 2 or 5 FlashesViking Range Code DSI 2 or 5 Flashes: Ignition Control Problem

No ProbeNo Probe questions

I am not using the probe. Why does it show No Probe?

Check that the cook mode is not set to a probe temperature. If you selected a normal bake and still see it, the probe input may be reading open and we should look at it.

Can I still bake without the probe?

Yes in most cases. Cancel the probe setting and use a regular timed bake. The message only concerns the probe input, not the heating elements.

Could the probe be the only problem?

Often it is. A new probe is cheaper than a control. We test the probe first, quote the price in writing and stand behind the work with a 30-day workmanship warranty.