Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Viking specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 597-3466 Book a Repair
Model library · Viking Range

VGRC365

Viking VGRC365 Commercial-Depth Range

Most common issues on this model

  1. Burner igniter clicking without lighting
  2. Flame uneven from grease in the ports
  3. Oven slow to light and heat
  4. Heavy oven door sagging or not sealing

The VGRC365 belongs to Viking’s commercial-depth family, which means a body 27 inches deep that stands proud of the surrounding counters. In its 36-inch form it usually anchors the cooking wall, with a heavy hood overhead and cabinets planned around its footprint.

A range built this solidly tends to age in its moving parts rather than its frame. The oven door is large and heavy, so hinge springs lose tension and the gasket stops sealing evenly. On the cooktop, grease clogs the open burner ports and leaves the electrodes dirty, and the oven igniter weakens year by year.

We begin with the door alignment and gasket, then run each burner and the oven burner. A smell of gas calls for everyone to step outside and for a call to the gas utility from the street. You see the price in writing before we begin, and 30 days of workmanship warranty follow every repair.

Key features

  • 36-inch open burner gas range
  • 27-inch deep commercial-depth body
  • Classic Series
  • Retired model
→Codes

Error codes this model can show

VGRC365VGRC365 questions
Why does the oven door on my VGRC365 droop when I open it?

The hinge springs on a heavy door gradually lose tension. We measure the springs, inspect the hinge pins and replace whatever is worn so the door opens smoothly and shuts tight against the gasket.

Does the 27-inch depth change how the range is serviced?

It makes the range heavier and longer to slide out, so we plan the pull-out and protect your floor. Most burner and ignition repairs are done from the top or front and do not require moving it at all.

A burner clicks but will not light. What should I try first?

Check that the burner cap is seated flat and that nothing wet sits under it. If it still clicks without catching, we clean the port, test the electrode and then check the spark module.

Book a visit

Book repair for your VGRC365

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Book a Repair