Viking Undercounter Refrigerator Code E2: How the Condenser Fan Current Reads

What E2 means

On Viking Professional and Designer undercounter refrigerators with TruProtect control, such as the VUAR1531T, the DUAR1531 and VURD refrigerated drawers, E2 reports a condenser fan motor problem, with the motor drawing high or low amps. The condenser fan moves air over the coils at the bottom, so a fan that is blocked or failing lets the cabinet warm up slowly while the display shows E2.

Common causes of E2

Condenser fan motor drawing too much or too little current
Fan blade blocked by dust or debris
Fan wiring or connector loose

✓ One safe check you can try

1. Switch the unit off and unplug it. 2. Vacuum dust from the front grille and look for anything touching the fan. 3. Plug it back in and clear the code: hold SET, press ON four times. 4. Listen for the fan. 5. If E2 returns, call us.

! Why to stop there

The fan motor sits behind the lower panel
Current readings need a meter on live parts
A hot condenser shortens compressor life

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

ShrViking Built-In Refrigerator Display Shr: Sensor Circuit Shorted Upper unit openViking Fully Integrated Column Message "Upper unit open": refrigerator door open Upper unit too coldViking Fully Integrated Column Message "Upper unit too cold": refrigerator running colder than set Upper unit too warmViking Fully Integrated Column Message "Upper unit too warm": refrigerator above its setting LLViking 5 Series Undercounter Refrigerator Code LL: compartment temperature too low oPnViking Built-In Refrigerator Display oPn: Temperature Sensor Open P1Viking Undercounter Refrigerator Code P1: thermostat probe failure POWERViking Built-In Refrigerator Light POWER: Flashing to Show a Power Loss

E2E2 questions

What does the condenser fan do?

It pulls air across the condenser coils to carry heat away. Without enough airflow the compressor runs hotter and the cabinet struggles to stay cold, which is why a fan problem gets its own code.

Will cleaning the grille help?

Often it does, because dust makes the fan work harder and can trigger E2. Vacuum gently from the front with the unit unplugged, and make sure nothing blocks the vent space.

Can I wait to call?

If the cabinet is still cold you have a little time, but keep the grille clear and call us soon. We quote the price in writing before any work starts.