Viking Professional 48-Inch Range Griddle Pattern: 2 flashes for griddle RTD probe

What Griddle RTD (2 flashes then 4 s off) means

On Viking Professional 48-inch and 60-inch ranges with a griddle, such as the VDSC548-4G, VGSC548-4G and VGIC4864GSS, the griddle cycle light flashing twice and then staying off for four seconds means the griddle RTD probe has failed or is misreading. The RTD is the temperature probe the thermostat control uses to hold griddle heat. On 48-inch ranges the same pattern also applies to the left-hand oven, so we check which one is meant.

Common causes of Griddle RTD (2 flashes then 4 s off)

A griddle temperature probe (RTD) that has failed open or shorted
A damaged probe wire or a loose connector
On 48-inch ranges, the same pattern coming from the left-hand oven probe instead
A thermostat control that cannot read the probe

✓ One safe check you can try

1. Turn the griddle and oven off and let everything cool. 2. Should a gas smell ever appear, walk out and call the gas utility from a neighbor's or your yard. 3. Clean grease from around the griddle plate edges once it is cool. 4. Switch the range breaker off for one minute and back on. 5. If the pattern returns, call us.

! Why to stop there

Gas ranges hold a gas train and ignition parts that are not for owners to open
The probe, wiring and control must be tested to find which one fails
The same pattern can come from the oven, so diagnosis needs the range in front of us

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

DSI LED OnViking Range Code DSI LED On: Steady Light at the Ignition Module DSI No LEDViking Range Code DSI No LED: Ignition Module Shows No Power Er31Viking Professional Induction Range Code Er31: interface error after board change Fan HallViking Gas Range Code Fan Hall: Fan Speed Sensor Problem Improper Self-Clean SelectionViking VDSC548T Code Improper Self-Clean Selection: A Delayed Clean Is Not Allowed Key ShortViking VDSC Range Code Key Short: A Key Press Lasting Over 30 Seconds KeyboardViking VDSC Range Code Keyboard: Key Board and Display Disconnected Meat ProbeViking VDSC Range Code Meat Probe: Probe Shorted or Misreading

Griddle RTD (2 flashes then 4 s off)Griddle RTD (2 flashes then 4 s off) questions

How do I know if it is the griddle or the oven?

Watch which cycle light flashes. On 48-inch ranges the same two-flash pattern can come from the left-hand oven, so we confirm which probe is meant before ordering.

Can I still use the burners?

Often yes, but if you smell gas leave the house and call the gas utility from outside. Avoid the griddle until it is checked, because it cannot read its own temperature.

What does the repair cost?

Usually a new griddle probe after testing it and its wiring. We write the price down before starting, and the repair comes with a 30-day workmanship warranty from the day we finish.