Viking Ice Machine Time to Clean Light: Six-Month Cleaning Reminder

What Time to Clean light means

On Viking clear-ice and nugget ice machines such as the FGIM5151 and FGNI515, the Time to Clean light turns on after six months of use. It stays on until the ice-making system is cleaned and the Clean-Reset procedure is done. It is a maintenance reminder, not a breakdown, and the machine can keep making ice meanwhile. Nothing in the machine has failed.

Common causes of Time to Clean light

Six months of use reached
Cleaning not yet performed
Reset step not done after cleaning

✓ One safe check you can try

1. Plan a cleaning with the cleaner your guide recommends. 2. Empty the bin of ice first. 3. Run the cleaning cycle fully. 4. Complete the Clean-Reset procedure. 5. If the light stays on after reset, call us. Use only the cleaner your owner's guide recommends.

! Why to stop there

It is only a reminder until reset fails
Scale reduces ice quality
The control may need checking

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Ice Machine codes

CL (alternating with ICE)Viking Clear-Ice Machine Display CL and ICE: Time for a Cleaning Diagnostic LED: 2+3 blinksViking Beverage Center Ice Maker LED 2 Blinks, Pause, 3 Blinks: Both Thermistors Out of Range Diagnostic LED: 2 blinksViking Beverage Center Ice Maker LED 2 Blinks: Defrost Thermistor Reading Is Off Diagnostic LED: 3 blinksViking Beverage Center Ice Maker LED 3 Blinks: The Evaporator Thermistor Reads Wrongly Diagnostic LED: 4 blinksViking Beverage Center Ice Maker LED 4 Blinks: Potentiometer Signal Is Out of Range Door icon (Door Alert Notification)Viking Clear-Ice Machine Door Icon: Door Open Over 30 Minutes dSp IcEViking Built-In Freezer Display dSp IcE: Ice Maker Needs Reset 2 FlashesViking Undercounter Ice Machine Code 2 Flashes: bin sensor open or shorted

Time to Clean lightTime to Clean light questions

Must I stop making ice?

No. The machine can keep making ice, but cleaning helps keep the ice clear and the water path clean. Cleaning also keeps the ice looking clear and tasting fresh.

Why does the light stay on after cleaning?

The Clean-Reset step may have been skipped. Repeat it, and if the light still stays on, call us. Use only the approved cleaner and do not skip the reset step at the end.

Can you clean it for me?

Yes. We quote the price in writing first and the work has a 30-day workmanship warranty. It is a short visit, and a clean machine makes clearer ice.