Viking Designer Dishwasher Code Light China Flashing: problem at the water inlet

What Light China Flashing means

On Viking Designer undercounter dishwashers DFUD042, DFUD142 and DFUD142P, a flashing light china indicator reports a problem with the water inlet. These European-built models use icons rather than numbers. Most of the time the cause is simply a closed tap. The dishwasher is not getting water in as expected. Check that the tap is open, then turn the main switch off and on again to clear the display.

Common causes of Light China Flashing

Water tap or shut-off valve closed
Supply hose kinked or blocked
Inlet valve problem

✓ One safe check you can try

1. Open the water tap under the sink fully. 2. Look at the supply hose behind the dishwasher for kinks. 3. Switch the dishwasher off and back on with the main switch to clear the display. 4. Start a cycle and listen for water filling. 5. If the icon flashes again with water available, call us.

! Why to stop there

A closed tap fixes most cases
A persistent flash means the inlet valve or hose needs testing
We give a written price first, with a 30-day warranty

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

High Level ErrorViking Built-In Dishwasher Code High Level Error (2-4): water level above limit User Interface Communication ErrorViking Built-In Dishwasher Code User Interface Communication Error (3-1): panel not talking to main control Inlet Valve ErrorViking Built-In Dishwasher Code Inlet Valve Error (4-4): fill valve reported Wash Heater ErrorViking Built-In Dishwasher Code Wash Heater Error (4-2): wash heater problem Internal ErrorViking Built-In Dishwasher Code Internal Error (5-5): control reported its own problem Low Level ErrorViking Built-In Dishwasher Code Low Level Error (2-3): water level sensor reading low Moisture SensorViking Built-In Dishwasher Message "Pan Flood": moisture sensor detects water in the base pan Moisture Sensor DisconnectViking Built-In Dishwasher Code Pan Flood Sensor Disconnect (1-1): flood sensor not connected

Light China FlashingLight China Flashing questions

What is the light china indicator?

It is the icon on the DFUD display that goes with the water inlet problem. When it flashes, the machine is telling you water is not coming in as it should.

I opened the tap. Why is it still flashing?

Turn the main switch off and on to clear it. If it returns with the tap fully open, the supply hose or the inlet valve may be restricted and needs a look.

Can hard water cause it?

Mineral buildup can clog the inlet screen and slow the flow. If cleaning is needed, we handle it during the visit and quote any parts in writing first.