Viking Dishwasher Code E:02: no water coming in

What E:02 means

E:02 appears on current Viking VDWU and FDWU 324, 524 and 724 dishwashers, including water-softener versions, when the machine cannot take water in. This happens if the main water supply is cut or the water inlet valve is turned off. The E:02 icon flashes and the program pauses, then resumes by itself when water returns, so many cases need no repair.

Common causes of E:02

Water supply to the home shut off
Shut-off valve under the sink closed
Inlet hose bent or kinked
Water inlet strainer blocked

✓ One safe check you can try

1. Run the kitchen faucet to confirm the house has water. 2. Check that the dishwasher shut-off valve under the sink is fully open. 3. Look at the supply hose behind the machine for sharp bends if you can reach it. 4. Once water flows, the program should resume on its own. If E:02 stays on with water available, call us.

! Why to stop there

Most E:02 cases clear once water returns
A persistent code with good water means the inlet side needs testing
You get a written price first, and a 30-day warranty applies

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

E:09Viking Dishwasher Code E:09: display board communication problem Pots/Pans + Heavy FlashingViking Designer Dishwasher Code Pots/Pans + Heavy Flashing: blocked drain E:10Viking Dishwasher Code E:10: user interface board communication problem Pressure Sensor Disconnect ErrorViking Built-In Dishwasher Code Pressure Sensor Disconnect (2-1): Huba sensor not detected Fill ErrorViking Built-In Dishwasher Code Fill Error (2-2): fill took too long Pump Flow ErrorViking Built-In Dishwasher Code Pump Flow Error (3-2): wash flow not as expected Fill too Fast ErrorViking Built-In Dishwasher Code Fill too Fast Error (4-5): tub filled quicker than expected Quick FlashingViking Designer Dishwasher Code Quick Flashing: valve leakage

E:02E:02 questions

Do I need to restart the cycle?

Usually not. The program pauses and picks up where it left off when water returns. If it stays paused after the supply is back, switch the machine off and on.

The faucet works. Why is E:02 still on?

The valve under the sink may be closed, or the hose may be kinked. If both check out, the inlet valve or its strainer may be the cause, and we should look.

Can low water pressure cause it?

Very low pressure can slow filling, but E:02 is mainly about water not coming in at all. Check other fixtures too, since a local supply issue shows up elsewhere.