On Viking gas self-clean ranges with cycle and clean lights, such as the VGSC548, the 3 Series RVGR3305B and the D3 RDSCG230-5B, four flashes of the cycle light, a four-second pause and the clean light on…
On Viking gas self-clean ranges with cycle and clean lights, such as the VGSC548, the 3 Series RVGR3305B and the D3 RDSCG230-5B, four flashes of the cycle light, a four-second pause and the clean light on mean a fan Hall-effect sensor error. The control cannot read the fan speed. On electric and dual-fuel versions, four flashes mean the high limit, so the model matters.
1. Shut the oven off and give it time to cool. 2. Check that nothing blocks the vents near the control area. 3. Switch the breaker off for a minute and back on. 4. Try a short bake and listen for the fan. 5. If four flashes return, call us. A gas smell means leave the house first, then call the gas utility from outside.
No. On this gas family it is the fan Hall sensor. On electric and dual-fuel versions the same four flashes point to the high limit. Always check your model.
Maybe, but it may only be the speed sensor and not the whole motor. A meter check tells us which one it is, so we do not replace more than is needed and you pay only for what is required.
We advise leaving the oven off until the fan is checked. Cooktop burners are a separate system. We quote the price in writing before any work.
A technician diagnoses it on site and gives you the price in writing before any work starts.
