Viking Microwave Drawer Display Flashes: Power Was Interrupted Earlier

What Display flashes means

On Viking microwave drawers such as the VMOD5240SS and VMODC5240SS, and other Sharp-built Viking microwaves, a flashing display means power failed at some point. Touch STOP/CLEAR and reset the clock. It is a status condition, not a breakdown. The microwave works normally once the clock is set again. It happens after a blink of the power, and a short outage is enough.

Common causes of Display flashes

Power outage or tripped breaker
Plug loosened
Brief power interruption

✓ One safe check you can try

1. Touch STOP/CLEAR once. 2. Set the clock. 3. Check the plug and the home breaker if the outage was not obvious. 4. Test with a cup of water for a minute. 5. If the display keeps flashing without outages, call us.

! Why to stop there

A flashing clock is normal after an outage
Repeated flashing with no outage points to the outlet or the control
Microwave internals hold high voltage

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave codes

Er01Viking Over-the-Range Microwave Hood Code Er01: sensor cooking cannot detect vapor ERRORViking Sensor Microwave Message "ERROR": vapor not detected or entry out of range ERROR WEIGHT TOO SMALL OR TOO LARGEViking Convection Microwave Hood Message "ERROR WEIGHT TOO SMALL OR TOO LARGE": weight outside the allowed range

Display flashesDisplay flashes questions

Is flashing a problem?

No. It tells you power was interrupted and the clock needs setting. Touch STOP/CLEAR and set the time. Setting the clock takes a few seconds, and nothing else needs to be done.

It flashes again every day. Why?

Check for tripped breakers or an outlet shared with a heavy appliance. If power is steady, call us. A shared outlet with a heavy appliance can also trip it, which is worth checking.

Is it safe to use?

Yes, once the display is reset and the microwave heats normally. We quote repair prices first and cover work for 30 days. Prices come in writing first.