Viking Dishwasher Code E:07: water inlet valve problem

What E:07 means

E:07 on current Viking VDWU and FDWU dishwashers in the 324, 524 and 724 series, including the WS versions, is a water inlet valve error. The inlet valve opens to let water into the tub, and when the control finds a problem with it, the E:07 icon appears. The dishwasher may not fill properly, or it may take in water when it should not.

Common causes of E:07

Inlet valve not opening or closing as commanded
Inlet valve connection loose or damaged
Control not driving the valve

✓ One safe check you can try

1. Confirm the shut-off valve under the sink is open and the faucet has water. 2. Switch the dishwasher off at its breaker for a minute. 3. Start a short cycle and listen for water filling. 4. If E:07 returns, or water keeps running with the machine off, close the shut-off valve and call us.

! Why to stop there

A valve that sticks open can let water in when it should not
Valve testing happens at the water inlet behind the lower panel
We give a written price first and a 30-day warranty on our work

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

Moisture SensorViking Built-In Dishwasher Message "Pan Flood": moisture sensor detects water in the base pan Moisture Sensor DisconnectViking Built-In Dishwasher Code Pan Flood Sensor Disconnect (1-1): flood sensor not connected Motor Control Comms ErrorViking Built-In Dishwasher Code Motor Control Comms Error (1-3): motor control not answering Motor Control Status ErrorViking Built-In Dishwasher Code Motor Control Status Error (1-2): motor control reports a problem Motor Status ErrorViking Built-In Dishwasher Code Motor Status Error (3-4): wash motor status reported Motor Under Voltage ErrorViking Built-In Dishwasher Code Motor Under Voltage Error (3-5): motor supply too low E:09Viking Dishwasher Code E:09: display board communication problem Pots/Pans + Heavy FlashingViking Designer Dishwasher Code Pots/Pans + Heavy Flashing: blocked drain

E:07E:07 questions

How is E:07 different from E:02?

E:02 means water is not available to the machine. E:07 points at the inlet valve itself, which can be the problem even when the house has plenty of water.

What if water keeps entering?

Close the shut-off valve under the sink and switch off the power. A valve that does not close can flood the tub and then the floor, so do not leave it running.

Can I replace the valve myself?

We do not recommend it. The valve connects to both water and power, and a small mistake causes leaks, so let us install and test it, with a 30-day warranty on the work.