Viking Incogneeto Warmer Code E-03: over current peak, try different cookware

What E-03 means

On the Viking Incogneeto under-counter induction warmer VUIW518, E-03 reports an over current peak. The induction electronics drew more current than allowed at a peak moment. The official advice is to try different cookware, and service may be required if the code stays. The code shows on the display and the warmer stops heating. A pan or container that suits the induction field poorly is the first thing to change.

Common causes of E-03

Cookware or containers that load the induction field badly
A pan with an uneven or warped base
Induction electronics that draw too much current
A supply or connection problem that exaggerates the load

✓ One safe check you can try

1. Switch the warmer off and remove the container. 2. Try a different, flat, magnetic container of suitable size. 3. Pull the plug, wait briefly, and plug the appliance in again. 4. Start a short cycle with the new container. 5. If E-03 appears again with other containers, call us.

! Why to stop there

Cookware is the cheap test, and it is the one to do first
Repeated over current can damage the electronics
Proper diagnosis needs measurements on the unit

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Warming Drawer codes

E-10Viking Incogneeto Warmer Code E-10: Magneeto II RTD failure E-16Viking Incogneeto Warmer Code E-16: critical error, service required E-01Viking Incogneeto Warmer Code E-01: broken temperature sensor E-06Viking Incogneeto Warmer Code E-06: high line voltage E-07Viking Incogneeto Warmer Code E-07: hardware failure E-08Viking Incogneeto Warmer Code E-08: zero cross failure

E-03E-03 questions

Can a pan cause E-03?

Yes. The official advice is to try different cookware. A warped, mismatched or unsuitable container can load the induction field in a way that triggers the code.

What if a new pan does not help?

Then the cause is likely in the unit itself, and service may be required. Leave it off and call us with the code and the model number.

What will you check?

We test the electronics, the supply and the connections. You get a written price before any work, and repairs come with a 30-day workmanship warranty from the day we finish.