Viking Range Oven Code Latch: door latch error on indicator-light ovens

What Latch means

On Viking indicator-light range ovens without a numeric display, such as the Professional VDSC530 and VESC530 and the D3 RDSCD230-5B, Latch is a door latch error. You read it from the lights: the cycle light is off and the clean light flashes one second on and one second off. The control could not confirm the latch position, so the oven stops the cycle.

Common causes of Latch

Door latch not in the position the control expects
Latch switch not registering
Door lock motor or wiring

✓ One safe check you can try

1. Let the oven cool before touching the door. 2. Close the door squarely and check that nothing is caught in the frame. 3. Press the oven off key and switch the oven's breaker off for a minute, then back on. 4. If the clean light keeps flashing, stop and call us. If you smell gas on a dual-fuel range, leave the house and call the gas utility from outside.

! Why to stop there

The latch assembly is behind the top trim
Forcing the door can bend the lock
Written price first, and a 30-day warranty on our repair

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

F08Viking EOC4 Wall Oven Code F08: display link lost, or double-oven clock mode on a single oven no probe (flashing)Viking Premiere Knob-Control Oven Message "no probe": probe function started without probe F09Viking EOC4 Wall Oven Code F09: runaway oven temperature above 650F PROBE ERRORViking Touch-Control Wall Oven Message "PROBE ERROR": meat probe open or shorted F1Viking ERC Oven Code F1: control malfunction on VGDO271 and VEDO273, shorted probe on VGSO166 RELAY ERRORViking Touch-Control Wall Oven Message "RELAY ERROR": no relay board connection F2Viking ERC Oven Code F2: over-temperature on VGDO271 and VEDO273, open probe on VGSO166 RTDViking Range Oven Code RTD: oven probe error on indicator-light ovens

LatchLatch questions

How do I read the Latch pattern?

The cycle light stays off and the clean light flashes evenly, one second on and one second off. That pattern is the door latch error on these ovens.

Why is the pattern different from the RTD one?

The RTD error flashes the cycle light and leaves the clean light off, which is the reverse of Latch. The two lights tell you which error it is.

Can I open the door with the Latch pattern showing?

If the oven is cool, a gentle try is fine. If it will not release, do not pry; call us so the latch is not damaged further.