Viking EOC4 Wall Oven Code F10: delayed self-clean was programmed

What F10 means

On Viking wall ovens with the EOC4 control, namely the Professional VESO127, VEDO127, VESO130 and VEDO130, F10 means an improper program selection: someone tried to program a timed, delayed self-clean cycle. The control does not allow a delayed clean. F10 is not an overheating message; the oven is fine. Turn the cycle off and set the clock to manual, then start the clean without a delay.

Common causes of F10

Self-clean programmed with a delay or stop time
Clock not in manual mode when the clean was set

✓ One safe check you can try

1. Press the cancel or off key to turn the cycle off. 2. Open the clock settings and set the clock to manual. 3. Choose CLEAN again and start it without a delay start. 4. If F10 appears when you have not programmed a delay, call us.

! Why to stop there

F10 is a programming message, not a repair
Only repeated appearances with no delay set deserve a visit
Any visit comes with a written price first and a 30-day warranty

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

HIGH LIMIT ERRORViking Touch-Control Wall Oven Message "HIGH LIMIT ERROR": safety thermostat tripped KEYBOARD ERRORViking Touch-Control Wall Oven Message "KEYBOARD ERROR": no link between keyboard and control LatchViking Range Oven Code Latch: door latch error on indicator-light ovens LATCH ERRORViking Touch-Control Wall Oven Message "LATCH ERROR": door latch will not lock or unlock F06Viking EOC4 Wall Oven Code F06: invalid model header ModelViking Range Oven Code Model: model identification error on indicator-light ovens F07Viking EOC4 Wall Oven Code F07: door opened during a clean cycle MODEL ERRORViking Touch-Control Wall Oven Message "MODEL ERROR": wrong model number installed

F10F10 questions

Is F10 an overheating warning?

No. F10 is about the program you entered. A runaway temperature is a different code. Cancel the cycle and start again without any delay, once the clock has been set to manual.

Can I schedule a clean for tonight?

Not as a delayed clean on these models. Start the clean when you are ready, then let the oven finish and cool down before you open the door.

How do I set the clock to manual?

Use the clock settings on the display and choose manual. That removes the timed setting that triggered F10. If you cannot find it, we can show you during a visit.