Viking Induction Rangetop Code 3 Flashes: internal power device malfunction

What 3 flashes (with brief interval) means

Viking induction rangetops VIRT301 and VCRT301 report an internal power device malfunction when the indicator flashes three times with a brief interval between sets. The power device is the electronic stage that feeds the induction coils, and this pattern means it is not working properly. The affected zones usually stop heating, and the unit may not recover after a restart. It points to the electronics, not to a pan or a setting.

Common causes of 3 flashes (with brief interval)

A power device (power module) that has failed or is failing
A loose or damaged connection to the power device
A related control board problem that disturbs the device

✓ One safe check you can try

1. Switch all zones off and let the rangetop cool. 2. Reset the breaker by turning it off, counting to sixty, and turning it on again. 3. Try one zone with a flat, magnetic pan. 4. If three flashes come back, leave the rangetop off. 5. Call us and mention the flash count and the full model number.

! Why to stop there

The power device is a sealed electronic part that needs testing before replacement
Opening the unit exposes live high-power wiring
Repeated attempts to run a failing device can damage more parts

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Rangetop codes

1 flash (with brief interval)Viking Induction Rangetop Code 1 Flash: internal power device over temperature 5 flashes (with brief interval)Viking Induction Rangetop Code 5 Flashes: power device temperature sensor malfunction 6 flashes (with brief interval)Viking Induction Rangetop Code 6 Flashes: coil temperature sensor malfunction 8 flashes (with brief interval)Viking Induction Rangetop Code 8 Flashes: inside ambient temperature too high 9 flashes (with brief interval)Viking Induction Rangetop Code 9 Flashes: cookware not compatible with induction

3 flashes (with brief interval)3 flashes (with brief interval) questions

Can a pan cause three flashes?

Not usually. Cookware problems show a different pattern. Three flashes points to the internal power device, which is why a new pan or a reset rarely changes anything.

Does a restart ever clear it?

It can after a one-off glitch. If three flashes return, the device or its connection needs testing, and it is best to stop using the zones meanwhile.

What will it cost to repair?

We test the power device and its connections first, then quote the price in writing before any work starts. The finished repair carries a 30-day workmanship warranty from our visit.